久久香蕉国产线看观看精品yw-久久香蕉国产线看观看亚洲卡-久久香蕉国产线熟妇人妻-久久香蕉影院-久久香蕉综合精品国产-久久香综合精品久久伊人

老化測試設備

咨詢熱線

18566398802
首頁 > 標準大全 > FLTM BO 116-01_2007標準詳情
相關測試儀器

FLTM BO 116-01_2007

  本頁面標準信息均來源于網絡收集,或由參與標準制定的供應商提供,只作為參考使用。我們愿意和您交流FLTM BO 116-01_2007標準細節信息或FLTM BO 116-01_2007測試方法,歡迎致電【18566398802】

FLTM BO 116-01_2007標準介紹

FLTM-BO-116-01標準簡介

FLTM-BO-116-01 汽車內飾材料暴曬試驗標準:水冷式氙弧燈氣候試驗箱方法

FLTM  BO 116-01_2007標準英文版

EXPOSURE OF INTERIOR TRIM MATERIALS IN A CONTROLLED IRRADIANCE

WATER COOLED XENON-ARC APPARATUS

Application

This procedure is used to determine the effects of simulated weather on interior trim materials using a controlled irradiance water cooled xenon-arc Weather-Ometer® with an auxiliary lantern and filters.

Apparatus Required

Operating Filter

335 nm long pass filters (SF-5 filters) or equivalent provided the transmission spectrum is within 95% of the SF-5 filter transmission at all wavelengths. The filters are reversible unless otherwise marked by a coating or etching.

Dimensions for the Ci 5000 series Weather-Ometer®:

339 mm +/- 0.13 mm x 70 mm +/- 0.13 mm x 3 mm +/- 0.52 mm

Dimensions for the Ci 35A, Ci 65A & Ci 4000 Weather-Ometer®:

220 mm +/- 0.13 mm x 70 mm +/- 0.13 mm x 3 mm +/- 0.52 mm

Lamp Sensor Irradiance Filter

420 nm Irradiance Filter

Available from:

Atlas Material Testing Technology LLC

4114 Ravenswood Ave.

Chicago, IL 60613 USA

Calibration Lamp

The calibration lamp must be calibrated to 420 nm with the lantern assembly removed.

Available from:

Atlas Material Testing Technology LLC

4114 Ravenswood Ave.

Chicago, IL 60613 USA

Sample & Test Conditions

Sample Conditioning

All test values indicated herein are based on material conditioned in a controlled atmosphere of 21 +/-2 °C and 50 +/- 5% relative humidity for not less than 24 h prior to testing and tested under the same conditions unless otherwise specified.

Test Conditions

Testing conditions such as black panel temperature, dry bulb temperature, humidity, light cycle times and dark cycle times are equivalent to those outlined in SAE J2412 – Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus, Table 1,Section 6.1.5.

Place the 335 nm long pass filters (SF-5 filters) or equivalent into the auxiliary lantern. Orient thelantern around the xenon-arc lamp assembly which is equipped with the Quartz/Type "S" Borosilicate filtered xenon-arc lamp source as outlined in SAE J2412 – Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus, Apparatus Set-Up, Section 6.

Exposures are monitored based on measured light at 1.06 W/m2 -/nm@420 nm SAE J2412 –Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance XenonArc Apparatus, Table 1.

Calibration

Equipment Calibration

As per SAE J2412 – Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus, Appendix A, Section A.3 and Appendix B.

Maintenance

Equipment Maintenance

As per SAE J2412 – Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus, Appendix A.

Note: SF-5 auxiliary filters should be cleaned at every lamp calibration period or more frequent if necessary.

SF-5 filters and the 420 nm interference filter should be changed per the manufacturer's recommendations/or within 13,000 hours of use.

Exposure

Sample Exposure

As per SAE J2412 – Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus, Test Procedure, Section 7.

Evaluation & Reporting

Sample Evaluation and Exposure Report

As per SAE J2412 – Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus, Evaluating and Reporting, Section 8 and Exposure Report, Section 9.

AATCC Gray Scale, 10 Step, According to AATCC Evaluation Procedure 1/ISO 105-A02 for Evaluation of Color Change.

FLTM BO II--01_2007測試機構

Upon request measure the gloss with a 60° glossmeter (or as specified in the applicable Engineering Standard) according to FLTM BI 110-01. Record the unexposed and exposed gloss.

Chemicals, materials, parts and equipment referenced in this document must be used and handled properly. Each party is responsible for determining proper use and handling in its facilities.

溫馨提醒:本FLTM BO 116-01_2007可能存在更新的版本,建議尋找FLTM BO 116-01_2007的發行商確認。

符合 FLTM BO 116-01_2007 標準的
老化試驗箱

  • 氙燈老化試驗箱圖片 氙燈老化試驗箱氙燈老化試驗箱

    Q-SUN Xe-3-HSE氙燈老化試驗箱具有全光譜光照功能、濕度控制以及噴淋功能,其命名規則為濕度控制(H)、噴淋(S)。

    Q-SUN Xe-3-HSE 馬上詢價
  • 氙燈加速老化試驗箱圖片 氙燈加速老化試驗箱氙燈加速老化試驗箱

    Q-sun Xe-1-BCE氙燈加速老化試驗箱配有全光譜氙弧燈、太陽眼輻照度控制系統,該型號的氙燈加速老化試驗箱同時具有背部噴功能。

    Q-sun Xe-1-BCE 馬上詢價
  • 氙燈耐候試驗機圖片 氙燈耐候試驗機氙燈耐候試驗機

    Q-SUN Xe-1-SCE氙燈耐候試驗機是一款支持水噴淋功能和制冷功能的氙燈加速老化設備

    Q-SUN Xe-1-SCE 馬上詢價
  • 氙燈老化試驗機圖片 氙燈老化試驗機氙燈老化試驗機

    Q-SUN Xe-3-HCE是一款具有全光譜光照模擬、濕度控制以及制冷功能的氙燈老化試驗機,其命名規則為濕度控制(H)、制冷功能(C)。

    Q-SUN Xe-3-HCE 馬上詢價
  • 氙燈耐氣候試驗箱圖片 氙燈耐氣候試驗箱氙燈耐氣候試驗箱

    Q-SUN Xe-3-HDSE氙燈耐氣候試驗箱具有濕度控制、以及雙噴淋功能,其命名規則為濕度(H)、雙噴淋(D)、噴淋(S)。

    Q-SUN Xe-3-HDSE 馬上詢價
  • 氙燈耐候試驗箱圖片 氙燈耐候試驗箱氙燈耐候試驗箱

    Q-SUN Xe-3-HSCE氙燈耐候試驗箱同時具有濕度控制、噴淋以及制冷功能,其命名規則為濕度(H)、噴淋(S)、制冷(C)。

    Q-SUN Xe-3-HSCE 馬上詢價
近期文章
主站蜘蛛池模板: 日韩a一级欧美一级 | 999精品视频在线观看 | 欧美精品中文字幕手机免费视频 | 九九九九九九伊人 | 99热热久久这里只有精品8 | 亚洲国产天堂久久综合9999 | 国产精品久久国产三级国不卡顿 | 91亚洲国产三上悠亚在线播放 | 玖玖国产精品 | 欧美亚洲国产第一页草草 | 老妇毛片久久久久久久久 | 日韩一区视频在线 | 久久亚洲精品中文字幕亚瑟 | 国产成人18黄网站麻豆 | 国产精品天天影视久久综合网 | 色综合久久综合网 | 福利午夜国产网站在线不卡 | xxx中国www免费 | 曰本女人一级毛片看一级毛 | 四虎影视在线播放 | 神马午夜不卡影院 | 亚洲欧美专区精品久久 | 农村苗族一级特黄a大片 | a毛片久久免费观看 | 狠狠色婷婷综合天天久久丁香 | 日韩欧美亚洲综合久久影院d3 | 看看免费a一片欧 | 成人午夜影院在线观看 | 日日夜夜精品免费视频 | 中中文字幕乱码 | 欧美毛片日韩一级在线 | 亚洲视频久久 | 狠狠狠狼鲁欧美综合网免费 | 日本不卡免费高清视频 | 在线不卡视频 | 亚洲香蕉久久一区二区 | 国产一级毛片免 | 成人小视频在线播放 | 日日干天天干 | 国产成人精品男人的天堂538 | 亚洲欧洲尹人香蕉综合 |