久久香蕉国产线看观看精品yw-久久香蕉国产线看观看亚洲卡-久久香蕉国产线熟妇人妻-久久香蕉影院-久久香蕉综合精品国产-久久香综合精品久久伊人

老化測試設備

咨詢熱線

18566398802
首頁 > 標準大全 > ISO 16701:2015標準詳情
相關測試儀器

ISO 16701:2015

  本頁面標準信息均來源于網絡收集,或由參與標準制定的供應商提供,只作為參考使用。我們愿意和您交流ISO 16701:2015標準細節信息或ISO 16701:2015測試方法,歡迎致電【18566398802】

ISO 16701:2015標準介紹

ISO 16701:2015英文簡介

Atmospheric corrosion of metallic materials, with or without corrosion protection, is influenced by many environmental factors, the importance of which might vary with the type of metallic material and with the type of environment. It is therefore not possible to design a laboratory corrosion test in such a way that the full complexity of real in-service conditions are taken into account. Acceleration (forced conditions) as such can also have a negative impact on the correlation to field performance. Nevertheless, tests with humidity cycling and only intermittent exposure to salt solution will generally provide a better correlation to field performance than tests using continuous salt spray.

This International Standard was developed in the automotive context, where the major contributor to corrosion is the use of winter time de-icing road salt in cool/cold temperate areas around the world, here as sodium chloride compounds acting in cyclic humidity conditions. The test procedure is moderately forced by humidity and salt and intended to be applicable for quality assurance of the metals and corrosion protections typically encountered in motor vehicles. The method can have relevance also in other areas of application, provided representing similar climatic conditions with an influence of sodium chloride compounds.

1 Scope

This International Standard specifies the test method, the reagents, and the procedure to be used in an accelerated atmospheric corrosion test constituting a 6 h exposure to a slightly acidified solution of 1 % NaCl twice weekly, followed by a condition of controlled humidity cycling between 95 % RH and 50 % RH at a constant temperature of 35 °C.

This International Standard does not specify the dimensions of the tests specimens, the exposure period to be used for a particular product, or the interpretation of the results. Such details are provided in the appropriate product specifications.

The accelerated laboratory corrosion test applies to

— metals and their alloys,

— metallic coatings (anodic or cathodic),

— chemical conversion coatings, and

— organic coatings on metallic materials.

NOTE 1 If testing low-alloy stainless steels, especially austenitic grades, according to this International Standard, there is a risk of receiving exaggerated pitting, not representative for most service environments.

NOTE 2 This International Standard is not suitable for testing of wax and oil based rust protection agents, due to the constantly elevated temperature condition of the test.

2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 4628-1, Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system

ISO 4628-2, Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering

ISO 4628-4, Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking

ISO 4628-5, Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking

ISO 8407, Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens

ISO 10289, Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates — Rating of test specimens and manufactured articles subjected to corrosion tests

Q-fog CRH鹽霧試驗箱用于ISO 16701:2015的測試方法

Q-fog CRH鹽霧試驗箱用于ISO 16701:2015的測試方法

Q-fog CRH鹽霧試驗箱用于ISO 16701:2015的測試方法

溫馨提醒:本ISO 16701:2015可能存在更新的版本,建議尋找ISO 16701:2015的發行商確認。

符合 ISO 16701:2015 標準的
老化試驗箱

  • 鹽霧試驗箱圖片 鹽霧試驗箱鹽霧試驗箱

    Q-FOG CRH1100是一款的具有相對濕度控制功能和溶液噴淋功能的鹽霧試驗箱.

    Q-FOG CRH1100 馬上詢價
  • 鹽霧試驗箱圖片 鹽霧試驗箱鹽霧試驗箱

    Q-FOG CRH600比起SSP/CCT鹽霧試驗箱增加了一個可調濕度控制功能,這意味著CRH鹽霧試驗箱具備更廣泛的標準適用范圍。

    Q-FOG CRH600 馬上詢價
近期文章
主站蜘蛛池模板: 99久久国产免费福利 | a级黄片毛片 | 久久最稳定资源站在线 | a一级黄色片| 另类日本人xxxxbbbb | 亚洲精品不卡午夜精品 | 日韩一区二区三区在线免费观看 | 在线观看男女爱视频网站 | 26uuu最新地址 | 精品视频免费播放 | 久久综合给会久久狠狠狠 | 久久久精品免费 | 香蕉视频18 | 日韩a级黄色片 | 99精品国产一区二区青青牛奶 | 日韩二区三区 | 久草久草 | 免费国产黄线在线观看视频 | 国产精品视频在 | 能免费看黄的网站 | 久久大香香蕉国产免费网vrr | 亚洲小younv另类 | 色婷婷色综合缴情在线 | 九九在线观看高清免费 | 中文字幕在线二区 | 色综合久久夜色精品国产 | 毛片2016免费视频 | 深夜免费在线观看 | 成 人国产在线观看高清不卡 | 99久久精品免费观看国产 | 九九黄色网 | 91探花在线视频 | www午夜视频 | 婷婷综合久久中文字幕一本 | 久久免费大片 | 国产一区二区久久久 | 日韩欧美中文字幕在线播放 | 亚洲欧美日本另类 | 国产啪爱视频精品免视 | 99久久999久久久综合精品涩 | 欧美色欧美亚洲高清在线观看 |